Floats Cowl
Our Floats Cowl may be even more beautiful than a photograph can convey. There’s much more to this simple cowl than meets the digital eye. In fact, it’s what it isn’t… loud, wacky, complicated… that makes it so special.
Named for the “floating” slip-stitched strands that form vertical columns on one side, the Floats Cowl is knit in the round in a crazy-simple 2-round stitch pattern.
Knit up with just 3 skeins of our incredible Season Alpaca, this cozy, soft baby alpaca fabric wraps twice around, like a swaddling blanket for your neck!
There’s no right side to a Floats Cowl: both sides are lovely. And while it is really simple to make, it is truly intriguing to the knitter’s eye!
Update: New Yarn
October 2020
We made our original version in Season Alpaca for a fairly crisp finish, but this time we turned to our very newest yarn, Brume, for a hazier take. Fifty-eight percent mohair for coziness, 25% wool for durability, and 17% silk for luminescence, Brume is a perfect balance of good things, distinctive for its soft and mysterious beauty. Learn more here!
Designed by Purl Soho designer, Jake Canton. Click here to see even more of Jake’s designs!
Share your progress and connect with the community by tagging your pics with #PurlSoho, #PurlSohoBusyHands, #PurlSohoFloatsCowl, and #PurlSohoSeasonAlpaca. We can’t wait to see what you make!
Materials
- 3 skeins of Purl Soho’s Season Alpaca, 100% baby alpaca. Each skein is 218 yards/ 100 grams; approximately 679 yards required. We used Heirloom White.
- US 4 (3.5mm), 40- or 47-inch circular needles
Gauge
Unblocked: 26 stitches = 4 inches in stitch pattern
Blocked: 24 stitches = 4 inches
Size
One Size
- Unblocked Circumference: 50 inches
- Finished Circumference: 54 inches
- Finished Height: 11 inches
Notes
You will knit this project in the round inside out, meaning that the side of the fabric facing you as you work will be the “wrong side.” Both sides are beautiful, but we’re calling the side with the horizontal bars of slipped stitches the “right side.”
All slipped stitches are slipped purlwise.
To change the finished circumference, cast on any multiple of 4 stitches.
Pattern
Cast on 324 stitches. We used a basic Long Tail Cast On. Do not join to work in the round.
Set-Up Row: *K2, p2, repeat from * to end of row.
Keeping the same side facing you, place marker and join to work in the round, being careful to not twist the stitches.
Round 1: *K2, slip 2 with yarn in back, repeat from * to end of round.
Round 2: *K2, p2, repeat from * to end of round.
Repeat Rounds 1 and 2 until piece measures 11 inches from cast-on edge, or desired height.
Bind off purlwise.
Weave in the ends and block, if desired.
I love this pattern, however, I prefer to knit with larger needles/thicker yarn. Would this pattern work using Alpaca Pure? Or, would the “floating” slipped stitches be too large? If this would work, do you have a suggested cast on for the cowl? Which size circular needle do you recommend? Thank you.
Hello Lindsay,
Thank you for writing in. Using a chunkier yarn will change the look of this cowl quite a bit, however it could be interesting! If you have any Heavy Worsted or Aran weight yarn in your stash you could make a little swatch to see how it would turn out.
If you do choose to go this route you will want to knit a gauge swatch to figure out how many stitches per inch you are getting. You can then use this number to figure out how many stitches to cast on.
I hope this helps and please let me know if you have any further questions.
Happy knitting,
Marilla
I would love to knit a matching cap/hat. Do you think it’s possible to knit a ribbed bottom edge, then start the pattern and decrease toward the top? I would think the decrease might be the trickiest part. (I am not a very experienced knitter.) Any suggestions? Thank you.
Hi Virginia,
Great idea! This lovely stitch pattern works over any multiple of 4 stitches, so you could certainly add the texture to a hat. The decrease would be challenging indeed. On the one hand, you could stop the textured section when you get to the crown and work it in stockinette. On the other, you could try to work out how decreases might work while minimally affecting the pattern. This would require a fair bit of trial and error but if you are up for the challenge, you could give it a try. Your best bet is to find a plain hat pattern that uses the same gauge yarn and whose cast on is a multiple of 4 to add in the texture.
I hope that this helps!
Cassy
I successfully made this as a hat. When I got to the top and wanted to begin shaping it I did as follows:
On a row in which you would K2, then slip 2 purlwise, I SSK, slip 2 purlwise* to the end of the row
Next row K1, P2tog* to end of the row
Next row SSK to the end of the row
Continue SSK rows until you have approx 6-7 stitches left, bring yarn through remaining stitches and tie off
Hi Laura,
How exciting! Thank you so much for sharing!
Best,
Cassy
What soft wool yarn would you recommend for me, since alpaca is a bit itchy when I wear it against my skin?
Thankmyou.
Hello Betsy,
Thank you for writing us! I think this cowl could be beautiful in our Mulberry Merino . This yarn is slightly thicker than our Season Alpaca, but it should still come out beautifully. I would just knit up a little gauge swatch before jumping in to prevent any surprises along the way.
Happy knitting!
-Marilla
Hi,
This is a lovely pattern and I absolutely love your Season Alpaca, but I had never tried Understory so went with that. I am getting close to 9” and because this yarn is a little stiffer(?) than Season Alpaca, with doubling it around the neck, I am thinking 11” might be too much!?
I was looking at the bind off and was wondering why you decided to bind off purlwise as opposed to ending with Round 1 and then binding off in pattern? Would that bring the last row of slipped stitches too close to the edge?
Thanks you so much for all your incredible store has to offer!! I absolutely love your patterns and all your beautiful yarn!! Please never close, I have no idea what I would do!!
Best,
Alix
Hi Alix,
Thanks for writing in, and thanks for your kind words! I think that making this cowl 11″ in height would be super cozy and wouldn’t affect its ability to wrap around the neck!
The reason that the bind-off is purlwise is because this project is knit in the round inside out, meaning that the side of the fabric facing you as you work is the “wrong side.” Both sides are beautiful, but we’re calling the side with the horizontal bars of slipped stitches the “right side.” You could absolutely bind off in pattern though, and it would still look great. I hope this helps clarify things!
All the best,
Lili
I love this pattern and am about to begin working it. I’m sorry if you’ve already answered this question, but are the stitches slipped knitwise or purlwise? Thank you!
Hi Kathryn,
Thank you for your kind words! The stitches are all slipped purlwise.
Happy knitting!
Carly
A little confused:the pattern says to slip stitches with “yarn in back”, which to me, means “slip knitwise” but the pattern says that “all slipped stitches are slipped purlwise”. Could you please clarify? Thank you.
Hi,
Great question! I am happy to clarify! Slipping knitwise or purlwise refers to the way in which you put your needle into the stitch and not necessarily where your yarn is. For this pattern, you will slip the stitches knitwise with the yarn in back. That is to say that you will put your needle into the stitch as if to purl but keep your yarn to the back of the work.
I very much hope that this helps clear things up!
Cassy
If I were to knit in the merino wool, how many skeins would I need and what size needles.
Hi Connie,
Thanks for writing in! You can certainly use an alternate yarn here. If you let us know which yarn you would like to use, we would be happy to help you figure out how many skeins you will need!
Best,
Cassy
Could I use 50% baby Alpaca/50% merino wool DK wool for this? I have 6 x 50g balls.
Many thanks
Hello Pip,
Thank you for reaching out! I would recommend knitting up a little gauge swatch to see how many stitches per inch you are getting. This cowl has a gauge of, unblocked, 26 stitches per 4 inches in stitch pattern and blocked, 24 stitches per 4 inches. Once you know what gauge you are getting with your yarn, you can figure out if you need to go up or down in needle size. It sounds like you have the perfect amount of yarn, so I say go for it!
Happy knitting,
Marilla
dows you stitch count change when being blocked? Inthe above comment you said gauge has unblocked,26 stitches per 4″ and 24 stitches blocked per 4″. How do you loose 2 stitches when you block? I don’gt understand this. I can understand it will shrink a bit when blocked but 2 stitches disappear? Than you for clarifying
Hello Brenda,
Thank you for writing in. When blocked this cowl will grow approximately 4″, so it will go from 50″ to 54″. This means your gauge will go from 26 stitches per 4″ ( unblocked) to 24 stitches per 4″ (blocked).
I hope this clarifies things for you.
Happy knitting,
Marilla
Is there a plant based yarn that could be used with this pattern to get the same gauge?
Hello Mari,
Thank you for reaching out! I think this cowl would be lovely in our Cotton Pure yarn.
Happy knitting,
Marilla
What type of cast on do you recommend for this cowl?
Hi Mari,
Thanks for writing in! Unless otherwise noted, we like to use the long tail cast on. We think that it makes a neat and flexible cast on edge!
Best,
Cassy
I love this pattern and even bought the suggested yarn. I keep twisting my stitches ugh! Anyway, I’m sure it’s obvious to a seasoned knitter but why not join in the round for row 1? Thanks!
Hi Megan,
Thanks for writing in! For us, working the foundation round flat as opposed to joining in the round, helps you get a base that helps prevents twisting the stitches before joining in the round. You certainly can join straight away but we do think that it helps to have a row already knit to make the twisting more evident. I also like to lay the work down on a table and make sure that no stitches are twisted before I pick up and join in the round!
I hope that this helps!
Cassy
Hi! I’m knitting this beautiful cowl and I messed up a few things here and there a few rows down. How do I tink down to fix a spot where I purled 2 instead of slipping 2?
Hi Rebecca,
I would recommend unraveling back to where you made the mistake. Slipped stitches are a little tricky to hide if you make a mistake.
Best,
Carly
Could this beautiful pattern be made into a scarf/wrap by just not knitting in the round?
Hi Judi,
Thank you for your question and interest in knitting a scarf or wrap version of this cowl! In order to fit the cowl on straight needles, you will be knitting the floats so that they run perpendicular to the the bottom edge instead of parallel as seen above.
To do so, cast on 50 stitches and work:
Row 1 (right side row): *Purl 2, knit 2, repeat from * until last 2 stitches, purl 2
Row 2 (wrong side row): *Knit 2, slip 2 wyib, repeat from * until last 2 stitches, knit 2
Knit until the piece measures 72 inches from the cast on and then cast off as above and sew the ends together.
I hope that this helps!
Cassy
Thanks for providing the pattern for knitting this on straight needles as opposed to knitting in the round. As a fairly new knitter this is always a bit tricky for me to figure out – you saved me a lot of time that I can now use for knitting!
Forgot to ask… I am not certain why the floats change direction since knitting in the same orientation as the cowl; nevertheless, if I wanted them to float parallel to the bottom edge (so the “ribs” run the length of the scarf) would you recommend casting on the long length?
Thank you, Heidi
Hi Heidi,
Thanks for the question! As there are two ways to do this, one a more traditional scarf where you cast on the short end and one a less traditional scarf where you cast on the full length, the floats will align differently depending on which way you cast on! If you would like the floats to be parallel to the long side of the scarf, you will cast on the long way. If you would like the floats to be parallel to the short side, you will cast on the short way.
I hope that this clears things up!
Cassy
Hi, do you have a specific type of cast on you would recommend? I know the long tail cast on really well but find that I usually have to cast on and start a few rows to work out if the tension is correct and not to tight before continuing. Thank you! For all your patterns, Lauren
Hi Lauren,
Thanks for writing in! For most of our projects, we like the long tail cast on and did use it here. We find that it makes a reliably neat and tidy cast on. If you find that you have difficulties with the long tail cast on and getting a good tension, you can try the traditional backward loop cast on or any other cast on that you find works for you! The beautiful thing about crafting is that you can change things to work for you and make you happy! If you have a cast on that you like best, I’d give that a try here!
Best,
Cassy
I was considering doing this cowl in Trout Brown. How do you think it would look in a darker color? Would the beautiful stitch pattern show up or do you think a lighter color works better?
Hi Amy,
Thanks for writing in! I think that this cowl would be lovely in Trout Brown. This color is not so dark that you won’t still see the lovely stitch pattern!
Happy knitting!
Cassy
Hello, I’m so excited to make this! I only have one skein of Season Alpaca, and was wondering how many stitches you would recommend casting on for a single loop cowl?
Thank you!
Chloe
Hi Chloe,
Thanks for writing in! A single wrap cowl can range from 18-22 inches depending on how close you would like it too fit, how drapey the fabric is and how stretchy you stitch pattern is. I would try a 19 inch circumference to start out with being sure to try it on as you go. You could also take a scrap piece of fabric and measuring how you would like it to fit on you. Just be sure to leave enough slack to be able to get the cowl over your head!
If you only have 1 skein, if you make a 19 inch version, you will not be able to get the 11 inch height that we got here. I would wager that it would be closer to 9 inches high. For a 19 inch circumference, you cast on will be 112 stitches.
I do hope that this helps!
Cassy
Hello –
Thank you for the beautiful patterns – I’ve made many! I was in your store this weekend and purchased Season Alpaca to make this pattern in the scarf version, as described in previous comments. I’m noticing the ends are curling in as I’m progressing in length. Any thoughts on how to manage this?
Thank you,
Mara
Hi Mara,
When you block your scarf the edges should not curl as much.
I hope this helps,
Melissa
Was your gauge obtained by swatching in the round or flat? Thank you.
Hello Donna,
Thank you for reaching out! I would recommend swatching in the round to obtain the most accurate gauge.
I hope this helps and happy knitting!
-Marilla
I love this! Thank you for the pattern. I would love to make this as a cowl but not as a double wrap. How many skeins would I need and how many stitches would I cast on? Would your new “good wool” work for this? Brooklyn Tweed Arbor? Cascade 220? Or Manos Maxima? I’m not a big fan of alpaca. Thank you!!
Hello Dana,
Thanks for writing in! A single wrap cowl can range from 18-22 inches depending on how close you would like it too fit, how drapey the fabric is and how stretchy you stitch pattern is. I would try a 19 inch circumference to start out with being sure to try it on as you go. You could also take a scrap piece of fabric and measuring how you would like it to fit on you. Just be sure to leave enough slack to be able to get the cowl over your head. You will need two skeins and a cast on of 112 stitches (for 19″).
This cowl’s gauge will work with our Mulberry and Merino, Brooklyn Tweed’s Arbor, or Cascade 220 Sport.
Happy knitting!
-Marilla
Hello!
I was wondering if this cowl would work well in the new Good Wool? I bought two of the 5 skein bundles, and am very excited to use them. I will definitely make a swatch to check, but if you had any suggestions on needle size I would really appreciate it! I’m very new to knitting, but I’ve been learning a lot through your site. I appreciate the help!
Thank you!
Hello Kelsey,
Thank you for reaching out! I think this cowl would be beautiful in our Good Wool. Because Good Wool is a thicker yarn than we used I would suggest going up in needle size and down on cast on (if you would like your cowl to have the same dimensions as ours). I would try this yarn out on a US6 needle.
I hope this helps and let me know if you have any further questions!
Warmly,
Marilla
I’m about to try this lovely pattern.
I’ll be doing it flat, on 2 needles – following Cassy’s instructions on 11th December 2017.
I’m new to slipping stitches and my question is – do you slip both stitches (purlwise) together; i.e. in one movement, or one at a time? or doesn’t it make any difference.
I’d be most grateful for your help and thanks in advance.
Hello!
For this pattern you can slip them purlwise at the same time or one at a time.
I hope this helps!
Carly
Before I officially knit my swatch, I wanted to get your expertise! Do you think 160 stitches in worsted weight yarn on size 7 needles would be enough to wrap the scarf twice?
Thank you!
Hello Willow,
Thank you for reaching out! This will really depend on how many stitches per inch you are getting from your swatch. I would knit up your watch and then you will want to multiply the number of stitches per inch you are getting by 50 to get your cast on number. You will just make to be sure that your cast on is a multiple of four before jumping in.
I hope this all makes sense and let us know if you have any further questions!
Happy knitting,
Marilla
I want to knit this is 8ply yarn and on straight needles.
Can you give me an idea of approx number of of stitches to cast on, and what size needles (in mm, as I am from Australia ).
I’m a novice knitter so am keen to give this a go.
Hello Kerry,
Thank you for reaching out! Are you planning on knitting this as a scarf, or knitting it flat and then seeming it up to create a cowl? For an 8ply yarn or DK weight yarn, I would go up to a size 3.75mm or 4mm to get the right texture. The width that you would like will determine how many stitches to cast on. Once you decided this you will multiply the number of stitches per inch you are getting by the desired width and this will give you your cast on number just making sure it is a multiple of 2 plus 2.
To work this pattern flat you will need to make a couple of small changes to the original pattern- here is how to do it;
Row 1 (right side row): *Purl 2, knit 2, repeat from * until last 2 stitches, purl 2
Row 2 (wrong side row): *Knit 2, slip 2 wyib, repeat from * until last 2 stitches, knit 2
I hope this all helps and let me know If I can Clarify any thing for you!
-Marilla
Thanks for your quick reply. I would like to knit this as a double loop. My store bought cowls are approx. 11 inches wide which is a good size. How long should I knit this before halving and sewing into a loop? Do you suggest I so a sample of this pattern by casting on a multiple of 4 stitches (eg 36 or 40) and knitting say 10 rows to see how many stitches I am getting per inch? If get 8 stitches per inch then do I cast on 88 stitches for an 11 inch wide cowl?
I know that’s lots of questions for you but I really appreciate your help.
Cheers,
Kerry
Hello Kerry,
thank you for your questions! Yes, I would recommend knitting up a gauge swatch to see how many stitches per inch you are getting. It sounds like you are right on track! As far as how long to knit it, that is really up to you, our cowl has a circumference of 50″ and has a snug double wrap.
I hope this helps and let us know how it goes!
-Marilla
I have only 2 skeins of season alpaca. Will this still work?
Hi Joanne,
Thanks for writing in! You can make this cowl with just two skeins, but we did use almost all of three skeins for our sample, so yours will turn out about a third narrower. I think it would still be a lovely warm cowl when worn wrapped several times around ones neck!
Best,
Julianna
I have some Malibrigo Rios yarn and wanted to know what size needle and how many stitches I would need to cast on to make the Floats Cowl using the Malibrigo yarn. I was not sure how to adjust the pattern with this yarn so any help would be appreciated, thanks.
Hello Nancy,
Thanks for reaching out! Because Malibrigo Rios is a worsted weight yarn I would try knitting this cowl on a US8 needle. To figure out a good cast on number you will just need to knit up a gauge swatch and then multiply the number of stitches per inch you are getting by 50 (the circumference of the finished cowl) to get your cast on number. You will just make to be sure that your cast on is a multiple of four before jumping in.
Happy knitting!
-Marilla
I would like to make a scarf with this pattern. Can you tell me what pattern of stitches the reverse row would be, please?
Thanks….
Hello Sharon,
Thank you for reaching out! To work this pattern flat you will need to make a couple of small changes to the original pattern- here is how to do it;
Row 1 (right side row): *Purl 2, knit 2, repeat from * until last 2 stitches, purl 2
Row 2 (wrong side row): *Knit 2, slip 2 wyib, repeat from * until last 2 stitches, knit 2
I hope this all helps and let me know If I can Clarify any thing for you!
-Marilla
Can this pattern be adjusted to make a scarf not a circular cowl?
Hello Maureen,
Thank you for reaching out! To work this pattern flat you will need to make a couple of small changes to the original pattern- here is how to do it;
Row 1 (right side row): *Purl 2, knit 2, repeat from * until last 2 stitches, purl 2
Row 2 (wrong side row): *Knit 2, slip 2 wyib, repeat from * until last 2 stitches, knit 2
I hope this all helps and let me know If I can Clarify any thing for you!
-Marilla
hi there – I had purchased some of the line weight merino to make the willow cowl and have not gotten to it. then I saw this pattern and am wondering if I could use the line weight yarn for this pattern and still see the detail of the slipped stiches…thanks in advance…
Hi Kasey,
Thanks for reaching out! I think this pattern would be lovely in Line Weight! Line Weight doesn’t show stitch definition quite as clearly as Season Alpaca, but you should still be able to see the floats and texture quite well. I would suggest knitting a gauge swatch on US 3 needles since it is a lighter weight yarn. You can then multiply your stitches per inch by 50 and round to the nearest multiple of 4 to determine your cast on number.
Happy knitting!
Julianna
This is so beautiful! I’d love to make this using Linen Quill yarn. Can you please advise how many skeins I will need and what size needles I should use.
Thank you!
Hi Sheri,
Thanks so much for the kind words and for writing in! Since Linen Quill is a bit thinner than Season Alpaca, I would suggest knitting a gauge swatch in pattern on US 3 needles and blocking it. You can then multiply your stitches per inch by 54 and round to the nearest multiple of 4 to determine how many stitches to cast on. Two skeins of Linen Quill will be plenty of yardage even at the smaller gauge!
Happy knitting!
Julianna
Hello!
So I have never blocked anything before. Would you use blocking wires for blocking this pattern? How would you lay this out to block it? I am having a hard time envisioning blocking this since it is a circular pattern.
Thank you!
Hi Amanda,
Thanks for reaching out! Since this project doesn’t require aggressive blocking, I probably would not use blocking wires for this. Blocking wires are very useful when you want to stretch out a finished piece while keeping the edges straight, but this cowl doesn’t require stretching to show the stitch pattern. I would just use a ruler or the edge of your blocking mats to make sure the top and bottom of the cowl are straight when you lay it flat to dry and secure with a few pins if necessary.
I hope that helps!
Julianna
I would love do know this in linen quill. Can you advise on needle size and cast on number? Thanks! What a simple but gorgeous pattern.
Hello Sherri,
Thank you for reaching out! I think this pattern would be beautiful in Linen Quill. I would try going down to a US3 or US2 depending on how tightly knit you prefer your cowl. This first thing I would do is knit up a little gauge swatch to figure out how many stitches per inch you are getting. Once you have this number you can use it to find the perfect cast on number. You will just want to keep in mind that this stitch is worked over a multiple of 4 stitches.
Happy knitting and let us know how it goes!
-Marilla
Hello! I ordered the alpaca yarn, made the cowl and it’s beautiful. I need a tutorial on how to wrap it around my neck. It’s lovely on the model but I can’t tell how she wrapped it.
Hello Kaye,
Thank you for reaching out- I’m so happy to hear that you enjoyed this lovely cowl. We like to do a double wrap for this cowl.
I hope this helps and happy knitting!
-Marilla
Hello, I don’t understand the instruction not to join at the cast on. The set-up row is k2p2, then wouldn’t one just continue with k2sl2? (In my case, I have done an i-cord CO, does that make a difference?)
Should I expect to see a jog where the rounds change?
Hi and thanks for writing in! You are correct – after working the first row not in the round, you then join in the round and continue with the next row, which begins with k2, slip 2 with yarn in back. The I-Cord cast on shouldn’t affect anything, but I think will be a very nice touch! Although there is a slight jog, since it is along one of the columns of slipped stitches, you really won’t be able to see it unless you are looking for it.
I hope that helps!
Julianna
I love this pattern but pretty new to knitting. I know how to work in the round but having trouble understanding which way to have my knitting facing me when joining to work in the round? I’m not very technical so an easy, peasy explanation would really help:-) . Desperate to start but rather stuck…..
Would this pattern work with 50% alpaca/50% silk yarn? If so what needle size the yarn recommends US 3-5? I have to hand a US 4 or 5.
So appreciate your beautiful designs and any advice:-)))
Hello JJ,
Thank you for reaching out! When joining in the round you will be creating a circle with your needles. You want the outside of the circle facing you, not the inside. I hope this makes sense – let me know if not!
You can use any yarn for this pattern as long as it is the correct size to obtain gauge. For this project you will need a sport weight yarn with a gauge of 6 to 7 stitches per inch on US3-US5.
Happy knitting!
-Marilla
I would like to knit this nice floats cowl with circular needles but without joining it. How do I knit the row 1 and the row 2? Is it the same… I do not think so because knitting will be like straight needles. How is the conversion? Sorry for my English writing… it is not my native language (french of Quebec). Thanks a lot! Geneviève
Hi Geneviève,
Thanks for writing in, and no need to apologize, I understand your question just fine! To knit this pattern back and forth in rows rather than in the round, you will need to modify it as follows:
Row 1 (right side row): *Purl 2, knit 2, repeat from * until last 2 stitches, purl 2
Row 2 (wrong side row): *Knit 2, slip 2 wyib, repeat from * until last 2 stitches, knit 2
I hope that helps, and happy knitting!
Julianna
Do you have a video tutorial for this cowl? I’m a beginner and have gone horribly (but consistently) wrong with this pattern. Instead of floating, my ‘float’ stitches are set back, almost behind the knit stitches either side. I followed the pattern to the letter.
Hi Elle,
Thanks for reaching out, and I’m sorry to hear you are having trouble with this pattern! Unfortunately we do not have a video for this stitch and it is hard to say what might have gone wrong without seeing your work. The cowl is knit inside out, so is it possible that you are looking at the wrong side of the fabric? It could also be that you are pulling too tightly on the yarn when slipping the stitches on Round 1. If that doesn’t help, please feel free to send us a picture of your work at customerservice@purlsoho.com and we would be happy to see if we can figure out what went wrong!
Best,
Julianna
Do you slip the two stitches at once, or individually? Thanks
Hi Nancy,
Great question! Since you are slipping the stitches purlwise, which does not twist or change the orientation of the stitches on the needle, you can either slip them together or individually, whichever you prefer. The stitch will turn out the same either way!
Best,
Julianna
I finished the firtst skein following the patten and checked gauge… I only have 2 inches in width! At this rate I will only have 6 inches using the 3 skeins. What am I doing wrong?
Hello Karen,
Thanks for writing us! Oh no! This does sound like a gauge issue, I would check and see if your stitch gauge or circumference is correct. My suggestion would be to go up in needle size in order to get the correct gauge.
I hope this makes sense and let us know if you have any further questions!
-Marilla
Re-floats cowl
After the setup row and joining in the round, are the pearl stitches the ones slipped.
If you get this question twice accept my apologies.
Sandra
Hi Sandra,
Thanks for writing in! Yes, that is correct! Throughout this pattern, you will be slipping stitches in the purl columns.
Best,
Julianna
Hi there,
This pattern is gorgeous! I would like to try knitting this up in Burnish. Do you think 3 skeins would be enough to knit this pattern but as a scarf? If so, what size needles) tension would you recommend as I like the drape pictured here.
Thanks so much!
Hi Belle,
Thanks for writing in, and what a wonderful idea – Burnish would be just lovely in this stitch! Burnish is only slightly thinner than Season Alpaca, so I would try a swatch on a US 3 to see if you are happy with it. Burnish also has more yardage than Season Alpaca, so with 3 skeins, you will have plenty of yardage for a scarf!
I hope that helps, and please do let us know how it turns out!
Julianna
I would love the look of this! Would 60% superfine alpaca and 40% merino wool yarn be advisable? I’m new at knitting and am having difficulty choosing a pattern. Thank you!
Hi Elly,
Thanks for reaching out! As long as your yarn is a sport weight yarn, an alpaca merino blend would work up wonderfully in this pattern! If you aren’t sure, you can check the yarn label to see if it indicates what weight of yarn it is, or to see what gauge is recommended. A sport weight yarn usually calls for a US 3-6 needle and will knit up to 24-26 stitches per 4 inches.
Happy knitting!
Julianna
Hi?
I’m currently making this lovely cowl. I should say struggling! My mistakes aren’t as easily detected until I’ve completed several rows and then you have to unravel so much. I need to check my work more frequently! I love the pattern though and I’d like to make a baby afghan in this pattern. Would Season Alpaca be suitable? How many stitches would I cast on to make a nice usable baby afghan?
Thanks for your lovely patterns?
Brenda??
Hi Brenda,
Thanks so much for writing in! Yes, I think Season Alpaca would be absolutely wonderful for a baby blanket! For a typical 29 by 38 inch crib blanket, you would need to cast on 172 stitches and you will need 6 skeins. To knit the pattern flat, you do also have to make a few small changes to the pattern as follows:
Row 1 (right side row): *Purl 2, knit 2, repeat from * until last 2 stitches, purl 2
Row 2 (wrong side row): *Knit 2, slip 2 wyib, repeat from * until last 2 stitches, knit 2
I hope that helps, and please do let us know how it turns out!
Julianna
Could this Season Alpaca been used on the Elementary Wrap you posted today?
Hi Marsha,
Thanks for reaching out! Yes, we actually already have pre existing patter for the Elementary Wrap in Season Alpaca that you can follow!
All the best,
Gianna
Hi, I’d love to try this cowl but first want to knit a swatch to check my guage and see how it looks in the yarn in going to choose. But how do I knit a flat swatch of this stitch? The instructions for knitting in the round are throwing me. Thanks!
Hi Siobhan,
Thanks for reaching out! We have an excellent tutorial for Swatching for Circular Gauge that should help you with this!
I hope this helps, happy knitting!
Gianna
Can this pattern be made with the Cashmere Merino Bloom yarn? Thanks!
Hi Laurel,
Thanks for reaching out! Cashmere Merino Bloom is a dk weight and Season Alpaca is a sport weight so Cashmere Merino Bloom is a bit heavier than what the pattern is written for but it should be very easy to adjust the gauge if necessary. I would recommend working a gauge swatch with an appropriate needle size and going from there! Our All About Gauge tutorial is an excellent resource to use!
All the best,
Gianna
I love this pattern, but I would like to knit it as a scarf instead of a cowl. Should I just follow the pattern but not join in the round? Thanks
Hi Elva,
Thanks for reaching out! You could certainly work this pattern as a scarf instead of a cowl! Be sure to keep in mind that the pattern is only written for working in the round over the right side so there are not written instructions for working the reverse of the fabric!
Please feel free to reach out with any more questions!
Warmly,
Gianna
Hi,
I would like to knit this shawl with the least itchiest yarn possible. What would you recommend? Cashmere? How many skiens would I need? I‘ve knit it in season Alpaca which is beautiful, but already itchy for my mom. Many thanks!
Hi Em,
Thanks for reaching out! I would suggest using our lovely Cashmere Merino Bloom, it is slightly heavier weight than Season Alpaca so you may need to go up in needle size, I would suggest working a gauge swatch prior to begining. It is an absolutely lovely yarn to wear, it is incredibly soft and not itchy at all.
I hope this helps, happy knitting!
Gianna