Beautyberry Blanket
On the cusp of our first frost, it couldn’t be a better time to introduce our newest yarn, big and cozy Gentle Giant, and with it, this cuddly Beautyberry Blanket!
We named our Beautyberry Blanket for the native bush whose bright purple berries linger through winter. In Gentle Giant’s heathered Purple Lupine and glowing Heirloom White, this blanket evokes a soft cover of berry-studded snow, one of nature’s amazing surprises.
A simple stitch pattern and our bulky-weight Gentle Giant make this blanket a quick and fun knit. Whip it up and be ready for frosty weather! -Laura
Materials
- Color A: 5 (7, 13) skeins of Purl Soho’s Gentle Giant, 100% merino wool. We used the color Heirloom White.
- Color B: 2 (3, 6) skeins of Purl Soho’s Gentle Giant Heather, 100% merino wool. We used the color Purple Lupine.
- US 19, 32-inch circular needles
- Two US 17 double pointed needles
Gauge
4.75 stitches = 4 inches in stitch pattern
Sizes
Baby (Crib, Throw)
- Finished dimensions: 24 x 36 (30 x 45, 40 x 60) inches
The sample shown here is a Baby size.
Notes
Knitting into the Stitch Below
k1b [knit one below]: Insert the tip of the right needle into the stitch below the next stitch from front to back, knit normally (wrapping the yarn around the needle and pulling it back through the stitch below) and let the stitch above fall from the left needle.
For more information about this technique, be sure to visit our Working into the Stitch Below Tutorial!
Turn or Slide
Each row in this pattern ends with the instructions to either “turn” or “slide” the work.
- “Turn work” means to do what you would normally do when knitting rows with a circular needle. That is to say, put the needle in your left hand into your right and the needle in your right hand into your left, and flip the work around so the opposite side is facing you.
- “Slide work” means to keep the same side of the work facing you and to push all the stitches to the right end of the circular needle. Without turning the work, start the new row as you normally would.
You will know that you’re doing this right if the yarn you need to complete the next row is magically there waiting for you!
Pattern
Begin
With Color A and the circular needles, cast on 27 (35, 45) stitches.
Row 1 (wrong side): With Color A, k1, *k1b (see Notes, above), k1, repeat from * to end of row, turn work (see Notes, above).
Row 2 (right side): With Color A, k2, *k1b, k1, repeat from * to last stitch, k1, turn work.
Row 3 (wrong side): With Color B, k1, *k1b, k1, repeat from * to end of row, slide work (see Notes, above).
Row 4 (wrong side): With Color A, k2, *k1b, k1, repeat from * to last stitch, k1, turn work.
Row 5 (right side): With Color A, k1, *k1b, k1, repeat from * to end of row, slide work.
Row 6 (right side): With Color B, k2, *k1b, k1, repeat from * to last stitch, k1, turn work.
Repeat Rows 1-6 until piece measures 34 ½ (43 ½ 58 ½) inches from cast-on edge, ending with Row 4.
Work Row 5, but bind off as you go. Here’s how…
With Color A, k1, *k1b, slip first stitch over second stitch and off right needle (binding off one), k1, bind off one, repeat from * to end of row.
Cut yarn and pull it through the remaining stitch.
Finish
NOTE: I recommend weaving in the ends before working the Attached I-cord border.
With Color A and the two double pointed needles, work a 2-stitch Attached I-cord around the entire edge of the blanket. With the right side facing you, start at any point of the blanket’s edge and work counter clockwise.
For the long side edges, pick up 2 stitches for every 3 rows.
For the short bottom and top edges, pick up a stitch into every stitch. This means for the bottom row you’ll pick up one stitch for each cast-on stitch, and for the top edge you’ll pick up one stitch for each bound-off stitch.
At each corner, work one row of Attached I-cord, then a row of unattached I-cord, and then another row of Attached I-cord.
When you’ve finished working the Attached I-cord, graft or sew its two ends together.
Weave in the remaining ends and block as desired.
I would love to make this blanket to match the size of the Eleventh Hour Marled blanket… 37×48. How many stitches would I have to cast on and how much yarn should I buy? Or maybe it would be better to size the Eleventh hour Marled blanket to be 40×60? Larger would be nicer. I just would like these two blankets to be comparable in size. Thanks!
Hi Amy,
Thanks for writing in! 40×60″ for this blanket is already an option in the pattern. If you look under “sizes”, you’ll want to follow the cast on and suggested yardage for the size listed last within the parenthesis. Let us know how it goes and feel free to write back if you have any questions.
Best,
Adam
Hello, I would like to knit this blanket using only one color of yarn. How will this affect the pattern? Will I still need to “turn” and “slide”? Another great pattern
Hello Renley,
Thanks for writing us. You will still turn and slide your work even while using one color. Nothing in the pattern should change except the fact that you aren’t using a contrast color. I hope this works out for you! I think it’s a great idea and that it’ll turn out lovely!
-Adam
Hola: Podrian subir un tutorial del punto de la mantita? Muchas gracias.
Hi Dalcy,
Thanks for writing in! I am sorry to say that we do not have the resources to create a tutorial for this stitch at the moment. We do do our best to describe how to work it in detail here. We will certainly keep your request in mind!
Best,
Cassy
Buena tarde, yo radico en la ciudad de México, y deseo hacer esta manta pero con medidas en centímetros de 90 cm por 1.20 cm, cuantos gramos necesito de estambre para realizarlo.
Hi Rosario,
Thanks for writing in! We are unable to provide help in Spanish but I have used a translator and think that I can help! 90 x 120 cm roughly translates to the second size of this blanket that is 30 x 45 inches. This size calls for 7 skeins of color A and 3 skeins of color B of our Gentle Giant. Each skein weights 100 grams and has 48 yards or 44 meters. This means that for color A, you will need 700 grams which is 336 yards or 308 meters. For color B, you will need 300 grams which is 144 yards or 132 meters.
I hope that this helps!
Cassy
Do you have the crochet instructions for this blankie?
Hi Lynn,
Thanks for your interest! At this time there is not a crochet version of this blanket! We will certainly keep your request in mind for future projects!
Best,
Cassy
Tres jolie avez vous les explications en français.Merci !Line
Bonjour Line,
A ce moment nous n’avons pas les resources de traduire nos explications en français mais peut-être à l’avenir! Merci de nous écrire!
-Adam
This blanket is gorgeous! I really want to try making it but I have no idea how to knit with two colors at once. I consider myself an advanced beginner so maybe this is too difficult for me. Do you have a tutorial on using two colors?
Hi Julie,
Thanks for the kind comment and sorry it took so long to get back! I would do a swatch of the stitch with two yarns of the same weight to see if you can get the hang of it. With this pattern you are working a brioche stitch in two colors, so that’s two advanced beginner techniques in one. If you read the directions, however, it’s pretty easy. You will either turn your work or slide your work across the circular needle to continue knitting with one color or change to another color. I’d give it a go if you are up for it!
Best of luck!
-Adam
When starting the blanket on row one on the wrong side there are only purl bumps in the row below. The video tutorial mentions inserting needle into a “V” knit stitch fo a k1b. I’m confused.
Hi JoAnne,
Thanks for writing in and sorry for the late response! Though there are purl bumps, you can still knit below the stitch on the left needle. We describe the knit “v” in the video because that is the kind of stitch we are executing in the video. Let me know if you have more questions!
Best,
Adam
Not sure what I’m missing, but how does one knit into the stitch below on the first row, when there are no stitches below?
Hi Vivian,
Thanks for writing us! If you did a long tail cast on you should have the stitch on the left needle and then the chain below it. Knit into this stitch below if you can. If you can’t, then I would purl across and start from row 2. Best of luck and happy knitting!
-Adam
Hello!
I cannot, for the life of me, figure out how to slide my work. When I’ve finished the row, my work is on the right needle, so…how do I slide my work to the end of the right needle when it’s already on the right needle? Any other sliding, and my working yarn ends up on the inside.
The answers I found in the comments section just aren’t helping me. Any way you could post a video or some kind of picture guide to your tutorial page? I’m more of a visual learner, and I can’t find any other resources that can help me.
Thanks!
Hi there,
Hopefully I can help! First of all, sliding your work requires a double pointed needle or circular needle because you will be knitting across the row and then sliding your work down the cord of the circular needle or body of the DPN to the other side. For example, if you are doing a one-row stripe alternating colors every row, color A and B will start on the same side. You’ll first knit color A and then slide your work back so you can work with color B. I hope this clears things up!
Best,
Adam
I would like to turn this pattern into a cowl. Would it be possible to do this in the round? Or is doing a provisional cast on and connecting the ends a possibility? Any cast on # suggestions would be appreciated too. Thanks!
Hi, Charlene!
Thank you so much for your questions! This would make such a lovely cowl! How long would you like your cowl to be? Large enough to wrap around twice? If so, I would recommend making it at least 45″ wide, so you can cast on about 53 stitches, according to the gauge the original pattern provides. Since the pattern is written in 2D knitting, we don’t recommend trying to convert it to be knit in the round. It would take so much time and effort that you could be knitting! I recommend simply stitching it up the side once your done.
Please let us know if you have further questions! Again, thank you for writing in.
Best,
Kumeko
Will this pattern work with any odd number of stitches or is there a stitch count that must be a multiple of a specific number?
Hi Jean,
Thanks for the question! I think that any odd number will work. I’d try this on a small swatch of about 11 stitches and see if it works out. According to my math it should!
Best of luck and happy knitting!
-Adam
I am still confused about how to slide my work. Is there a tutorial video that I can watch demonstrating it?
Thanks,
Kayla
Hi Kayla,
Unfortunately there is no tutorial on this on our website but maybe you can find something on Youtube. As for sliding your work, you’ll be working on a double pointed or circular needle. When you get to the end of a row, you’ll have the yarn you just worked with on the left and the yarn you will work with on the right. Without turning the work you’ll slide your work down the cord of the circular needle or body of the double point. After doing this you’ll have the needle with the yarn your intend to work with in your left hand and you’ll be able to knit the second color to meet up with the color you just knit. I hope this clarifies things! Let me know if you have any other questions!
-Adam
I’m thinking about making this using 2 strands of DK weight yarn together, one navy and one pink as these are my niece’s color.
How many stitches do you think I should cast on? And, what size needles, please.
Thank you so much for all your beautiful free patterns. You are so generous to all of us knitting enthusiasts.
Happy holidays to you all.
Marcia
Hi Marica,
Thanks for writing in! Given that 2 strands of DK would be much thinner than the yarns used here, I would suggest knitting a gauge swatch on US 8 or 9 and see when gauge you get as well as whether or not you like the resulting fabric. If the fabric is too tight, try a US 10 and if it is too loose, try a US 7!
This stitch pattern works over an odd number of stitches. With that in mind, you will multiply the number of stitches that you are getting per inch by the width that you are interested in knitting and cast on the nearest odd number.
I hope that this helps and happy knitting!
Cassy
Thanks so much. I” going to start on size 9 needles. I did a stockinnette gauge and came up,with 3.5 st to the inch. Is it ok to use that as my reference? I was going to cast on 85 or 91 stitches and go from there.
Thanks so much.
Marcia
Hi Marcia,
Thanks for writing back to us! A stockinette gauge is going to yield a very different gauge than a K1B gauge, so I suggest doing your swatch in the stitch the blanket uses just to be sure. With the gauge you’ve provided, you’ll get a 24-26″ wide blanket in stockinette. Is this what you’re aiming for? Let us know!
-Adam
This is such a beautiful stitch pattern. Would you say it’s possible to use it for a sweater (knitted from the bottom up, so only decreases)?
Thanks,
Lana
I forgot the sleeves will have to have increases as well, which makes it more complicated… I haven’t tried the pattern yet, but it looks like it’s created over a small number of stitches, so maybe decreses and increases at the edges are possible. Does that make sense?
Thanks again,
Lana
Hi Lana,
Thanks for writing in! It certainly could be possible but I do believe that you will need to do a fair amount of trial and error to get it down. The increases could certainly be done along the seem of the arm but I am not quite sure how they would work. I would suggest playing around with swatches and I am sure that you will get it!
Best,
Cassy
Hi Lana,
Thanks for writing us! I think it’s totally possible to do a whole sweater in this and quite a good idea. You’ll have to play with the decreases on a swatch to see which look best, but after a few trials you’ll get it. Thanks and best of luck!
-Adam
I’ve just finished the blanket and need to start on the border. I’ve read your tutorial on Icords but for the life of me I can’t figure out how to do this attached Icord border. Do you have a video tutorial on this? Any suggestions you might have would be greatly appreciated
Hi Lori,
Thanks for the question. While we don’t have a video on this at the moment, I suggest looking at YouTube for some tutorials. You might have some luck there.
-Adam
Thanks for the reply. One more question, I’m from Toronto, is your yarn available in Canada? With the exchange on the dollar, ordering yarn directly from your site is a tad costly
Thanks
Hi Lori,
Thanks for writing in. Our yarn is only available in our NYC store and online unfortunately. Sorry about this!
-Adam
If I change to size 13 needle approximately how many stitches do I cast on to get 40×60.
Hi Judy,
Thanks for writing in! Your cast one number will depend on the gauge that you are getting! I would recommend knitting a gauge swatch and counting how many stitches you are getting per inch. This pattern works over any odd number of stitches. So once you know how many stitches you are getting per inch, you can multiply that number by 40 and cast on the nearest odd number and you should be good to go!
Best,
Cassy
Two questions about the Beautyberry Blanket:
1. If I slip 1 instead of K1 at the beginning of each row do you think this will make a neat enough edge to skip the i-cord edge?
2. I’m looking at using a machine washable yarn so this can be an everyday baby blanket. The yarn I am considering ordering is 3.5st/inch (either Berroco Vintage Chunky or Cascade Superwash 128). Color A uses 336yds of Gentle Giant and color B uses 144 yd and the gauge is about 1st/inch. So if I take 336yds X 3.5 = 1176 — is that an okay ballpark estimation of how much yarn to order?
When I made the Chevron Baby Blanket I used a worsted weight yarn (the gauge was about 2x what the pattern called for) held double and ordered twice as much as the pattern called for. This worked for that pattern and looked great. I swatched this pattern doing the same and it just doesn’t look good with yarn held double (or at least this particular yarn) so I want to go with a bulkier yarn.
Thanks for any guidance you can provide. I love your patterns — particularly the blankets.
Hi Jean,
Thank you for writing in! I am happy to help you with your question!
1. While slipping a stitch on a standard pattern creates a tidier edge, here, due to the fact that you are slipping the work back and working the same row 2 times in a row, you will be slipping the same stitch 2 times in a row. This may create a issue in the general pattern. Additionally, we used the i-cord here to hide the color transitions as well as create a neat and beautiful edging. If you omit the i-cord, you will not hide these transitions.
2.You calculations seem good to me. When changing gauges, I always like to add about 10% just in case.
Thank you again for your kind words and I hope that this helps!
Cassy
I would like to do this pattern in a king size blanket would that be possible? If so what would be the cast on number?
Hi Mikaleila,
Thanks for writing in! This pattern works over any odd number of stitches! I have found measurements of 108×90 for a king size blanket. At this size, your cast on number would be 129 stitches. You will also need 4 times the amount of yarn for the largest size.
I hope that this helps!
Cassy
Hi,
I was wondering how much of each color I would need if I wanted to do the i-cord in the dark color (B) instead of the light one?
Thank you! I’ve been wanting to knit this for a long time!
Hello Jen!
Thank you for writing. Unfortunately, since we knit this a long time ago we don’t remember exactly how much yarn was needed for the i-cord, but I can guess it’s probably more than one ball of Gentle Giant at 48 yards per skein. We think that reserving about 110 yards of the dark color for the i-cord should do it. Please let us know if you have any more questions!
Best wishes,
Kumeko
How do I rip out the stitches without ripping the whole thing???
thank you
Hi Toby,
Thanks for the question. When ripping back any sort of knit below structure you will have to fix it using the brioche stitch. Click here if you are unfamiliar. Knit below and brioche are made similarly, so when you rip back your knit below stitch you’ll see that there is a stitch, a long float and then another stitch. You’ll want to restring your stitches so that there is an alternating pattern of a “normal stitch” and a stitch that has the yarn over floating over the top of it (just like the brioche stitch). After you’ve restrung your stitches you’ll knit the single stitch and knit together the stitch and the yarn over. It’s very hard to explain over this comments thread, but you’ll also find many tutorials on YouTube!
All the best,
Adam
Hi,
I want to know for the first row : how to do the k1b?
What cast on do you use?
Thanks and have a nice day!
Marina
Hi, Marina!
Thank you for writing in! We used the Long Tail cast on for this blanket. To do the k1b you’ll insert the tip of the right needle into the stitch below the next stitch from front to back, knit normally (wrapping the yarn around the needle and pulling it back through the stitch below) and let the stitch above fall from the left needle. This may look a bit tricky since it doesn’t look the way a “k1b” usually looks, however, you should be able to insert your needle into the next stitch of the cast on to achieve this technique. Please let us know if you have anymore questions.
Best wishes,
Kumeko
Your tutorial video on “knitting into the stitch below” was wonderful and I understand it! However, in Row 1 of this pattern, how do you knit into the stitch below if this is the first row and there is NO stitch below?
Hi Sue!
Thank you for your question! We are delighted that you found the tutorial helpful! To do the k1b you’ll insert the tip of the right needle into the stitch below the next stitch from front to back, knit normally (wrapping the yarn around the needle and pulling it back through the stitch below) and let the stitch above fall from the left needle. This may look a bit tricky since it doesn’t look the way a “k1b” usually looks, however, you should be able to insert your needle into the next stitch of the cast on to achieve this technique. Please let us know if you have anymore questions
Best wishes,
Kumeko
I love this pattern — am using it to knit a dish towel out of leftover cotton yarn. I have one problem: when there’s an error, I cannot figure out how to unknit it successfully — I’ve torn the thing out about three times, and now, 12 inches in, I’m reluctant to do it again.
Hi Janet,
Thanks for writing in. Fixing any knit below stitch is difficult to explain in writing, but I’ll do my best. First, you’ll want to familiarize yourself with the brioche stitch. In order to fix fisherman’s rib, you need to know how to knit brioche. When taking fisherman’s rib off the needles you’ll see that there is a normal stitch and then an elongated stitch with a “float”. You’ll want to restring the normal stitch and then the elongated stitch, hanging the float over this stitch like when you yarn over a slipped stitch in brioche. In the next row you’ll knit the elongated stitch and float together like in brioche. I hope this makes sense! If not, I’m sure there are fix it tutorials on YouTube.
Thanks,
Adam
When I cast on 27 st I can get the first row to work but the next row does not end with a k1. It can’t if you k the first two sts. as pattern states
Help
Hi Gigi,
Thanks for writing in! I am sorry to hear that you are having difficulty. Row 2 should work out to 27 stitches. You will begin k2 and then *k1b, k1* (repeating these 2 stitches between the *s) and then knit the last stitch. So the row begins with 2 stitches, then you repeat the 2 stitch combo 12 times. At this point, you should have worked 26 stitches and this leaves the last stitch to be knit.
I hope that this helps!
Cassy
By my calculation this blanket would cost over $400 to knit! Surely there’s a cheaper yarn that you could offer?
Hi Jill,
Thanks for writing us. I suggest Cascade Magnum for a less costly blanket. Hope you like the suggestion!
-Adam
Is it possible to make the beautyberry blanket using crochet instead? TM
Hello Shelley,
Thanks for writing in! Unfortunately we do not have a crochet version of this blanket. I will certainly pass your request along!
-Marilla
Hello, I would like to knit this blanket using only one color of yarn.
I’m looking at using a machine washable yarn so this can be an everyday baby blanket and does not shed.The yarn I am considering ordering is either Purl Soho Cotton Pure, Blue Sky Alpacas Worsted Cotton or , Cascade Yarns Ultra Prima. Which one do you recommend? How many stitches would I need to cast for a crib blanket using the yarn you recommend? How many skeins would I need? Thanks for any guidance you can provide. I love your patterns — particularly the blankets.
Helo Susie,
Thanks for writing in and your kind words! I love this idea and I think it could be beautiful in all three of these yarns. It’s tricky to give you an exact estimate on cast on and amounts needed without a gauge swatch, but I’m happy to give you a rough estimate. Our Cotton Pure Yarn and Cascade’s Ultra Pima have the same gauge so depending on your needle size (I would suggest a US5 or US6) I would cast on approximately 145(Baby) 181(crib) 241(Throw). I would estimate that you will need 4 Skeins for the baby size 7 for the crib size and 12 for the throw size. Cascade’s Ultra Pima has about 40 less yards than our cotton pure so you might need to get an extra skein if using Pima.
Blue Sky Alpacas Worsted Cotton is a thicker yarn so, Again depending on the needle size (US 7 – 9) you end up using I would suggest casting on approximately 120(Baby) 150(crib) 200(Throw). I believe you would need about 5(baby), 7(Crib) or 12(Trow).
Before jumping in I would knit a gauge swatch so you know exactly how many stitches per inch you are getting. I hope all of this information makes sense and is helpful. Please let me know if you have any further questions!
Happy knitting,
Marilla
I am starting this blanket. I understand how to knit 1 below. However, at the beginning, I can’t seem to K1B on first row. Are you supposed to knit one row first? I have tried several times to K1B on first row, after casting on, and I can’t seem to get it to work. Thank you so much!
Hi Chaun,
Thanks for writing in! We do not knit a row before beginning the k1b. Although it may seem a little awkward, you can k1b using the cast on. To do the k1b you’ll insert the tip of the right needle into the stitch below the next stitch from front to back, knit normally (wrapping the yarn around the needle and pulling it back through the stitch below) and let the stitch above fall from the left needle. This may look a bit tricky since it doesn’t look the way a “k1b” usually looks, however, you should be able to insert your needle into the next stitch of the cast on to achieve this technique.
I hope that this helps!
Cassy
How should I approach blocking this finished blanket?
Hello Kathleen,
Thanks for the question! I do not recommend wet blocking this yarn if you don’t have to. Steam blocking is your best option, so I’d give it a little steam and let it lay flat to dry. Best of luck!
-Marilla
Hello! Such a beautiful pattern, it will definitely be my next pattern. I do have a question though: do you have to cast on stitches by a certain multiple? I am looking to make this with a worsted weight yarn, so I know I’m going to have to cast on a lot more stitches. A lot of patterns will say “cast on x # of stitches, or any multiple of 6/even number/odd number (etc.),” is that important here, or will any number of stitches work out okay? I hope my question makes sense, and thank you in advance!
Hi Lacey,
Thanks for writing in! Any odd number of stitches should work with this lovely pattern! Once you know your gauge using the stitch pattern, you can multiply the number of stitches by the number of inches wide that you would like the blanket and then cast on the nearest odd number!
I hope that this helps!
Cassy
I want to make this Beautyberry blanket as a scarf instead . Let’s say 8″ x 70″. So from all the comments I’ve read, I’m thinking I would cast on either 9 stitches or 11 stitches. Does that sound about right?
(I’m leaning towards 9 stitches since the iCord would add some additional width. Or maybe I should go with 7 stitches …)
Any guidance you can provide is appreciated.
Love your patterns.
Cat.
Should have also asked, for an 8″ x 70″ scarf, how much yarn would I need? …. 2 skeins color A and 1 skein color B??
Hi Cat,
Thanks for writing in! For a roughly 8″ x 70″ scarf, you will cast on either 9 or 11 stitches. I think that you will need 3-4 skeins of color A and 2 skeins of color B to get the length.
I hope that this helps!
Cassy
I am going to be attempting this as a crib blanket but plan to try it out with lion brand super bulky weight yarn with size 13 circular needles. Wondering if you could advise on what length of yarn i would need to complete this as a crib blanket. Each skein has 81 yds. Thank you and so excited to make this blanket!
Hi Zoe,
Our Gentle Giant has 48 yards per skein. If you can get gauge with the yarn you are substituting you will need about 250 yards of the main color and 100 yards for the contrasting color to make a crib blanket. I would recommend doing a gauge swatch to make sure you can get gauge with your new yarn!
Happy knitting!
Carly
What is the name of the stich? Your invention ?
Hi Suzanne,
Thanks for the question! The stitch is basically a version of 2 color fluffy brioche using the fisherman’s rib technique instead of the classic brioche technique!
I hope that this helps!
Cassy
This is a lovely blanket but I want to make the 40 X 60 size blanket using the more affordable Magnum yarn. Yarn amount….Color A, 3 skeins and color B, 2 skeins, or do I need more? Thank you for any suggestions.
MaggieM
Hi Maggie!
For this project you need about 624 yards of color A and 288 yards of color B. If you use Cascade Magnum I would recommend 6 skeins for color A and 3 skeins for color B.
I hope this helps!
Carly
Hi Carly,
Thank you so much for letting me know how much yarn I need. : )
I am having trouble understanding the “slide work” part. I have checked YouTube as you have suggested to others in the comment section but unfortunately cannot find one on this subject. Do you have a video you could share?
Thank you
Mary
Hello Mary,
Thank you for reaching out! Unfortunately we do not currently have a video for this technique, Is there a particular aspect of the “slide work” that is tripping you up? All pattern means when it says to slide work is to, without turning your work, slide your work from one one needle on your circulars to the opposite needle of your circulars , instead of turning your work like you normally would when beginning a new row.
I hope this clears things up for you, but if not we can certainly continue to trouble shoot it.
Warmly,
Marilla
Hi,
I’d like to use Blue Sky worsted cotton yarn in two colors for this blanket (the same yarn I used for the Cozy Corners blanket) on a size 9 32″ circular needle. Is this possible? I think I can adjust the pattern… though if you can tell me the # of stitches are in a repeat that would help.
I’m really looking to use the Blue Sky worsted cotton for a two color baby blanket in about a 24″ x 36″ blanket. Could I use this yarn in the Mosaic baby blanket pattern I have from Purl Soho?
Thanks tons,
Michelle
Hello Michelle,
Thank you for reaching out! This blanket should knit up beautifully on a size 9 in Blue Sky’s Worsted Cotton. You just need to be sure that you are casting on an Odd Number of stitches.
Blue Sky’s Worsted Cotton would also work well with the Mosaic Blanket with no adjustments needed.
I hope this is helpful and happy knitting!
-Marilla
I’m using this pattern to make placemats and I’m liking the effect, but the first color row (purple above) are more triangles instead of a berry. Not sure what I’m doing wrong.
Hi Yvonne,
Thanks for reaching out! It is hard to say for sure without seeing your knitting, but I think this sounds normal for this pattern! If you look closely at the pictures, you can see that the “berries” are just somewhat stretched knit stitches, and if you are using a yarn that is less puffy and lofty than Gentle Giant, they will look even more like ordinary knit stitches. Much of the berry effect is a function of the super bulky gauge and loft of the yarn, but the stitch pattern still creates an interesting color and texture dynamic in lighter weight yarns! If you still think something might be wrong, please feel free to send us a picture of your work at customerservice@purlsoho.com so we can take a look!
Best of luck and happy knitting!
Julianna
This is beautiful!
I’ve got a bunch of beautiful fingering-weight yarn, how could I translate this pattern to work with that weight, and scale it up to be about 60×60″? Thank you!
Hi Alex,
Thanks for writing in and for the kind words! In order to convert this pattern to fingering weight, I would suggest knitting a swatch in pattern on US 3 or 4 needles. You can then multiply your stitches per inch by 60 and round to the nearest odd number to get your cast on number.
Best of luck and happy knitting!
Julianna
I want to use the knitted cast-on for this blanket. Will I need to purl my first row or can I go right into the k1b pattern? Or would the cable cast-on be better?
Hi Stefy,
Thanks for reaching out! Due to the fact that it will have a thicker, more stable edge, I do think a cable cast on would make it easier to work the first row without working a set up row, and it should also make it a bit easier to work the attached i-cord at the end.
I hope that helps!
Julianna
Yes, thank you! If I wanted to do a set up row anyway, should it be a knit row or purl row? Also, if I do a set up row, should the last row of the blanket be an all-knit (or all-purl) row as well?
Hi Stefy,
Since the first row of the pattern is a wrong side row, I would work a knit row before beginning. To make the other end match, I would end with Row 5, and then work a purl row while binding off.
Best of luck, and please let us know how it turns out!
Julianna
I would like to make this using dk weight since I live in Arizona. Should I double the amount of stitches cast on using a size 10 or 11 needle?
Thanks in advance.
Hello Amalia,
Thanks for reaching out! This is a lovely idea. For a dk yarn I would recommend knitting up a gauge swatch on a US6 or US7 and seeing how many stitches per inch you are getting. Once you know this you can multiply this number by the width that you would like your blanket to be and go from there! You will just want to be sure that you are casting on an odd number of stitches.
I hope this helps and let us know how it goes!
I’m on row 3 and struggling with the k1b – it looks like I’m knitting into the back of one of the k1b stitched from the previous row and I’m not sure how to do it (it looks like there are two loops around the stitch and I don’t see any V if that makes sense). Do I go through both of those? Or am I missing the point completely. Thanks!
Catherine
Hi Catherine,
Thanks for writing in! I am sorry to hear that you are having difficulties! It sounds as though you are off by a stitch in your repeat. One row 3 the k1b should be into the stitch next to the stitch with 2 collars on it. I knit up a little swatch myself and accidentally did this the first time around. Row 2 ends with 2 knit stitches and row 3 begins with a knit and then a k1b. With that in mind you should be k1b into the knit stitch and then so on moving down the row. I accidentally knit the first 2 stitches and then k1b into the stitch with 2 collars on it (the k1b from the previous row). Perhaps this happened for you as well.
I hope that this helps!
Cassy
I love this and love the stitch. I’d like to try using it for a hat. Is there a pattern or suggestion for doing this pattern on the round?
Thanks so much!
Hello Roda,
Thank you for reaching out! We do not have a hat pattern in this stitch. Unfortunately, because the pattern is written in 2D knitting, it would be pretty tricky to convert it to be knit in the round.
Happy knitting!
-Marilla
I was curious how many stitches you’d recommend for a double size?
Hello Gina,
Thank you for reaching out! This stitch pattern is worked over any odd number of stitches so you could cast on 55 (71, 91) to double any of the sizes.
Happy knitting!
-Marilla
This would cost a small fortune to knit. You’ve gotta be rich or get gifted the yarn
Hello Ann,
We hear you! We totally understand that sometimes our yarn suggestions are more of an inspiration than a reality for many people. We are always happy to recommend less expensive (but still beautiful!) alternatives. In this case, we suggest that you try Cascade’s Magnum.
Happy knitting!
-Marilla
I noticed I made a mistake while knitting the blanket several rows down. I would like to drop the stitch to the point of the error but don’t know how to pick back up the stitch. Any suggestions? I haven’t been able to find any tutorials on fixing this stitch.
I don’t want to make a bigger mess.
Hello Laura,
Thank you for reaching out- we have certainly all been there! Because you are knitting into the stitch below for this project it will be very difficult to drop down and fix the mistake. I would reccomend ripping back instead of dropping down for this particular stitch.
I hope this helps and good luck!
-Marilla
I love this blanket. I’m an intermediate knitter and have worked on the blanket for months. Is there a tube video that can show me how to fix the mistakes. I can’t pick up stitches when I make mistakes, therefore I have to pull the whole thing out and start over. Please help I love this stitch.
Hello Vicky,
Thank you for reaching out. I’m sorry to hear about your frustrating experience! This type of stitch is always a challenge when fixing mistakes. Are you having trouble ripping back? With this type of stitch I usually will go back stitch by stitch, because it is so easy to pick your stitches up incorrectly.
I hope this helps and good luck!
-Marilla
Would it be possible to make this blanket in your super soft merino instead of the gentle giant and if so, what size needle and # of stitches would you need to cast on if making the 30×45 size blanket?
Hello Jacqui,
Thank you for reaching out! I think this blanket would be lovely in our Super Soft Merino. I would try knitting it up on a US#13. To figure out a goof cast on number, you will need to knit up a gauge swatch to figure out how many stitches per inch you are getting. Once you get this number you will be able to use it to figure out a good cast on number. This stitch pattern works over an odd number of stitches. With that in mind, you will multiply the number of stitches that you are getting per inch by the width that you are interested in knitting and cast on the nearest odd number.
I hope this helps and happy knitting!
-Marilla
Marilla,
Thank you for your quick response. I ‘m 5 stitches in on my K1K1b and I made the mistake of knitting k2 row. Would like to correct going back stitch by stitch, but have two loose bars of stitches . Please help explain what to do with the loose stitch from below. If not I can just keep going on the the row?
Sorry for being confusing..
Vicki
Hi Vicki,
Thanks for reaching out! When you run into these stitches while taking out a row of this blanket, I would use a crochet hook to pick them up as if they were a dropped stitch so that you can k1b normally when you are ready to work the row again.
I hope that clears things up!
Julianna
Thank you so much for your patience. I’ve manage to work it out with your help , and the blanket is coming along great!