I have always loved ribbon embroidery, I love it’s texture and vintage feeling. As many of you know, we just moved our stores into a bigger space in New York and one of the perks is that we get to carry some items we never had room for before. When I saw that we were now carrying little packets of silk ribbon for embroidery I knew I wanted to try it out so I took a handful of beautiful colors home for some research. It turns out that ribbon embroidery is very similar to regular embroidery, which I absolutely love, so it wasn’t long before I was hooked!
Armed with my new skill, I wanted to make something pretty that could show off what makes ribbon embroidery so special. I decided on pillow cases because they are such a fun and easy warm weather project and a perfect blank canvas. I used a solid white in the silky smooth Organic Cotton by Cloud 9 Fabrics for the pillowcases. This fabric feels so amazing, like the sheets at a really fancy hotel! I embroidered a simple little bunch of flowers in cheery colors and then sewed the pillow cases with a deep hem.I love the results! This is one of those projects I’m going to be making over and over again, it’s practical, easy to sew, and beautiful! –Molly
To make Two 20-inch by 31-inch pillow cases:
- 2-yards solid quilt weight fabric in white (you don’t have to use white but your fabric must be double sided and not have a right or wrong side.)
- Nine packets of 4mm silk ribbon in various colors. I used colors, 002, 009, 014, 063, 070, 102, 114, 117, 122
- A water soluble fabric marker
- 100% cotton thread in color 100
- A 4-inch Embroidery Hoop
Cutting and Marking
Cut the fabric into four 36-inch by 21-inch pieces. Put two of them aside, you will use them for the second pillow. For the remaining two pick one piece to be the back and the other to be the front.
For the back piece of the pillow: Lay the piece horizontally. Using the water soluble marker make three vertical marks at a 1/2-inch, 4 1/2-inches and 9-inches from the right hand 21-inch side.
For the front piece of the pillow: Mark the piece in same way as for the back only start from the left hand 21-inch side. Then mark a 6-inch tall by 4 1/2-inch wide rectangle at the bottom left corner. Finally, mark a 1/2-inch line horizontally at the bottom of the rectangle. This rectangle is the area for the embroidery.
Draw 8 to 11 very simple five-pointed flower shapes with stems as shown above. Do not draw them too close to the edges of the marked rectangle.
Place the marked bottom left corner of the front piece into an embroidery hoop and thread an embroidery needle with a 16-inch length of silk ribbon.
The flowers are all embroidered with the Lazy Daisy Stitch:
Enter the fabric with your needle from the back through the center of one of the flowers. Pull the ribbon all the way through and then turn around, placing your needle back into the same place you came out of originally but don’t pull yet. Poke your needle through vertically to to top of the petal marking as shown above.
Pull needle out and pull the ribbon until the little loop looks like a small petal as shown above and then place the needle back into the same spot where you just came out.
You’ve now got one petal.
Do this for all five petals, always starting each petal at the same middle point.
To embroider the centers use a French Knot (click on this link if you need a little more help with this stitch):
Thread your needle with another color of ribbon. Enter the fabric from the back at the flower’s center point as shown above.
Wrap the ribbon around the needle a couple of times very close to the fabric. Poke the needle back into the center point with the ribbon still wrapped around it and pull it through to the other side.
You’ll have this beautiful little knot in the center.
The stems are made with a large Backstitch (click on this link for a more indepth explanation):
Thread your needle with a third color of ribbon (most likely green). Enter the fabric from the back to the front, about half way down your marked stem.
Poke your needle back into the fabric at the top of the marked stem.
Then come out again at the bottom of the stem, and then place your needle at the beginning point of your first stem stitch and pull the ribbon through.
The stem is now finished!
To add a leaf use the Ribbon Stitch:
Pull the ribbon out somewhere along the bottom of the stem. Then pierce the center of the ribbons width as you stick your needle back into the fabric about 1/4-inch from where you came out as shown above.
Do not pull this ribbon stitch very tight, or else it’s pretty end will dissappear.
Your full flower is now complete.
Repeat these steps for all of the flowers you drew on in the marking step.
Sewing the Pillows
Turn the front pillow piece over so the wrong side of the embroidery is facing up and is oriented at the lower right had side of the piece. Fold and press down a 1/2-inch vertical fold (along the first marking) towards the left.
Then fold the embroidered section over along the second marked line and line up the folded edge with the final vertical marking. The right side of the embroidery will now be facing up and the raw edge will be folded inside this deep hem. Press and pin the fold down.
Sew the fold down with a 1/4-inch seam allowance.
Fold and sew the marked edge of the back piece in the same manner along the markings. The side with the fold on top is now the right side.
Pin the front and back pieces right sides together, with their deep hems lined up. Sew them along the three raw sides with a 1/2-inch seam allowance and then zig zag stitch along the raw edges for a neater finish.
Turn the pillow case right side out and press it flat.
Repeat all steps to make the second pillow case and you’re all done!